As a manufacturer of full-color LED displays, Winbond Yingguang needs to understand the characteristics of full-color LED displays as much as possible, so that when customers choose, we can recommend corresponding high-quality products according to their conditions. The following is an introduction to the three advantages of full-color LED displays. The selection can focus on understanding from these three aspects.

1. The shooting distance is moderate.

As mentioned earlier, the different dot pitch and fill factor of full-color LED displays have different shooting distances suitable for full-color LED displays. For example, a full-color LED display has a dot pitch of 4.25mm and a fill factor of 60%. The distance between the subject and the screen is about 4-10 meters, so that you can get a better background photo when shooting the subject. When people get close to the screen to take close-up shots, the background will appear grainy, which can easily cause moiré interference.

2. The distance between points should be as short as possible.

The dot pitch is the distance between the center points of adjacent pixels on the full-color LED display. The smaller the dot pitch, the more pixels per unit area, the higher the resolution, the closer the shooting distance, and of course the more expensive it is. At present, full-color LED display screens are used more frequently in TV studios in my country, and their dot pitch is between 6-8mm. In order to achieve consistent resolution, point-to-point display can be realized, and thus better results can be achieved, the relationship between the resolution of the signal source and the dot pitch must be carefully studied.

3. The color temperature can be adjusted in the studio.

When a full-color LED display is used as the background, its color temperature should be consistent with the color temperature of the lighting in the video hall, so that accurate color reproduction can be obtained during the shooting. Depending on the needs of the project, the studio lighting can be 3200K low color temperature lamps or 5600K high color temperature lamps. The full-color screen needs to be adjusted to the corresponding color temperature to achieve satisfactory shooting results.